Shared surfaces ready for the next hand
In any workplace, a handful of surfaces pass through almost every hand before lunch: the front door pull, the elevator call button, restroom faucets and flush handles, the refrigerator in the breakroom and the shared printer. Ascent Cleaning gives those surfaces a dedicated disinfecting pass, so the people in your building start each day with touchpoints that have been freshly treated.
The pass can run inside your janitorial service on every visit, on the nights you pick, or as a standalone visit you call in when the building needs extra attention. It follows one room list and one set of products every time, so the result stays consistent whichever crew member is on the route.
The order of work on each surface
A disinfectant works only where it reaches the surface. Fingerprints, food residue, soap film and dust sit between the product and the material underneath, so each touchpoint is wiped with a detergent first and the disinfectant goes on afterward. That two-step order is what separates a treated surface from one that only looks clean.
Once a surface is clean, the disinfectant is applied and left wet for the full dwell period its label sets, then allowed to air dry or wiped down where the directions call for it. Breakroom counters where staff prepare food get a sanitizer made for food-contact surfaces instead, with a rinse wherever its directions require one.
Cloths are color-coded by area and changed between rooms, so a cloth that touched a restroom fixture never ends up on a kitchen counter. Microfiber traps soil rather than pushing it around, and each restroom starts with a fresh set.
The touchpoint route through your building
At the entrance, the route covers door pulls and push plates, the lobby counter, sign-in tablets and pens, elevator buttons and stair rails. In restrooms it takes in faucet handles, flush valves, stall latches, soap and towel dispensers, the partitions beside the sink and the handle on the way out.
In breakrooms the list runs to the fridge door, the microwave handle, the buttons on coffee and water machines, tables, chair backs, sink fixtures and vending machine fronts. Shared equipment comes next: copiers, conference phones, presentation remotes, hot-desk keyboards and the time clocks hourly crews punch in on. Electronics are wiped with a dampened cloth rather than sprayed, following each maker’s care instructions.
Personal desks join the route whenever you add them, and offices that run on hot desking usually include every workstation so each person sits down to a treated surface.
Disinfection across the Bay Area, North Bay, Sacramento region and Central Valley
In San Francisco office towers, lobby turnstiles, elevator banks and shared tenant restrooms carry the heaviest touch traffic, and a day porter can repeat the touchpoint pass while the building is full. In Pleasanton, business-park conference floors and breakrooms shared by several teams can get the touchpoint pass on every visit.
Roseville and Pleasanton both have many medical offices. Practices there can pair disinfection of waiting rooms, front desks and patient restrooms with clinical-room cleaning done under the facility’s own protocol through our medical office cleaning.
At distribution centers in Stockton and Lathrop, time clocks, locker rooms and driver lounges are shared by whole shifts, so the pass lands in the gap between crews. Vacaville‘s biotechnology and pharmaceutical sites set their own entry rules for office wings and break areas, and Napa‘s visitor-facing businesses want restrooms and front counters treated before the doors open.
Routine schedules and on-request visits
Restroom and breakroom disinfection belongs on every visit, with quieter touchpoints, such as conference room tables and storage room handles, rotated through set nights of the week. Busy buildings add a midday porter round that repeats the entry and restroom points while people are in.
On-request visits cover the moments a routine schedule does not: a team returning after a run of sick days, a suite reopening after a remodel, a training day with outside guests or a weekend event in a shared hall. Tell us the rooms and the date, and the visit is finished before your staff arrive or after they leave.
Schools and daycares have classroom tables, cubbies and play surfaces treated after children go home; see school and daycare cleaning. Fitness centers add equipment grips, locker room benches and the front desk counter to the route.
Products matched to your rooms and surfaces
Stainless fixtures, laminate counters, sealed stone, glass and plastic each tolerate different chemistry, so every product is chosen for the material it treats. We follow both the product label and the surface maker’s guidance, and when your facility keeps an approved product list, that list decides what goes on the cart.
Products are diluted and stored exactly as their labels direct, and Safety Data Sheets for everything in use are available whenever your team asks. Facilities that prefer low-fragrance or plant-based options can combine disinfection with green cleaning across the same visits.
What sets the price of a disinfection program
Disinfection is priced inside your recurring plan or as its own visit. The number of touchpoints counts for more than square footage: a compact office with several restrooms and a busy breakroom takes longer than an open warehouse office of the same size.
Visit frequency, any daytime porter rounds, after-hours or weekend timing, the amount of shared equipment and any products on your approved list all move the figure. We walk your building, set out the touchpoint route room by room and list each item in a written quote.
A few useful answers
Common questions.
Can disinfection be added to our current janitorial visits without changing the schedule?
Yes. The touchpoint pass runs during the visits you already have, and the cleaner simply works through the disinfection route as part of each room.
Can we book a single disinfection visit after a stretch of staff absences?
Yes. Tell us which rooms and floors to cover and when your team returns, and the visit is finished before people come back to work.
Do breakroom counters get the same product as restroom fixtures?
No. Counters where food is prepared get a sanitizer made for food-contact surfaces, rinsed where its directions require, while restroom fixtures get a disinfectant suited to their finish.
How are copiers, conference phones and keyboards treated?
Shared electronics are wiped with a dampened cloth rather than sprayed, following each maker’s care instructions, so screens, buttons and housings are treated without moisture getting inside.
Can a porter repeat the touchpoint pass during business hours?
Yes. A day porter can work through entry doors, elevator buttons and restroom fixtures at set times while your building is busy, and the full disinfection pass still happens after hours.

